Basic Operations for Scanning Originals
This section describes the basic operations for scanning originals.
1
Place the original.
2
Press <Scan and Send> on the Main Menu.
3
Specify the destination on the Scan Basic Features screen.
Screen(P. 408)
Specifying Destinations from the Address Book
Specifying Destinations from One-Touch Buttons
Entering Destinations Manually
Specifying Destinations in the LDAP Server
Specifying Your Own E-Mail Address
Specifying Personal Folder
Specifying Destinations from the Address Book of a Mobile Device
●
To specify e-mail destinations as Cc or Bcc, press <Cc Bcc>
specify destinations.
●
To specify multiple destinations, press <Specify Destinations> and specify an additional destination.
●
To delete a destination, select the destination you want to delete, and press <Delete Dest.>.
Specifying Destinations from the Address Book
1
Press <Address Book>.
2
Select the destination and press <OK>.
●
If an access number is set when the destination is registered, press <Access No.> and enter the access
number using the numeric keys. The corresponding destination is displayed in the Address Book.
●
To use the Remote Address Book, press <To Remote Address Book>. When <Change Address Book> is
displayed, press <Change Address Book>
Scanning
Placing Originals(P. 106)
<Remote>.
411
<Main Menu> Screen(P. 94)
Scan Basic Features
<Cc> or <Bcc>
13WK-07E
<Specify Destinations>