Cannot find the selected server. Check the settings.
The host name cannot be identified when the authentication information of the LDAP server is set to
<Use (Security Auth.)>.
●
Check whether the settings in <DNS Settings> are correct.
<Network>(P. 741)
●
Check whether the settings on the DNS server side are correct.
The IP address could not be identified.
●
Check whether the settings in <DNS Settings> are correct.
<Network>(P. 741)
●
Check whether the settings on the DNS server side are correct.
Cannot connect to the selected server. Check the settings.
Could not connect to the IP address/port.
●
Check whether the server address and port number in <Register LDAP Server> are correct.
Registering the LDAP Server(P. 49)
●
Check whether the LDAP server is operating normally.
●
If <Authentication Information> is set to <Use (Security Auth.)> for the LDAP server, check whether UDP
packets are blocked by the filter.
●
Check whether the gateway address set in <TCP/IP Settings> is correct.
Setting an IPv4 Address(P. 33)
Could not send.
An error occurred in the WebDAV server or proxy server.
●
Check the settings for the WebDAV server or proxy server.
The target file or directory does not allow access from outside.
●
Check whether the WebDAV server settings are correct.
●
Check whether the destination is correct.
Registering Destinations(P. 186)
Accessing the Advanced Box from a Computer(P. 479)
Access to the WebDAV server is busy.
●
Try sending again after waiting a while.
Chunk divided sending was refused.
●
Set <Use Divided Chunk Send for WebDAV TX> to <Off>.
<Use Divided Chunk Send for WebDAV TX>(P. 777)
The data to send is too large.
●
Reduce the size of the data and try sending again.
The specified URL (host name and folder path set as the destination) is too long.
●
Check the full path to the HTTP server entered in <Host Name> and the path to the WebDAV folder
entered in <Folder Path> as the destination.
Registering Destinations(P. 186)
Basic Operations for Scanning Originals(P. 411)
Troubleshooting
<TCP/IP Settings>
<TCP/IP Settings>
941