Setting Up
Setting the Wait Time When Connecting to a Network
13WK-00W
If you intend to implement network redundancy by connecting several switching hubs, a mechanism is necessary to
avoid packet looping. In this case, it is effective to determine the roles of the switching ports, but communication may
not be properly transmitted in cases just after changes such as adding a new device to the network. To connect the
machine to such a network, set the waiting time which is the time until the communication starts.
<Preferences>
<Network>
<Waiting Time for Connection at Startup>
Set the waiting
time
<OK>
<Apply Set. Changes>
<Yes>
LINKS
Making Ethernet Settings(P. 39)
41