Canon imagerunner advance C5550i User Manual page 928

If settings require manual entry
● If the wireless LAN router is set as follows, perform manual entry (
Specifying Detailed Settings(P. 29) ):
- ANY rejection* is enabled.
- An automatically generated WEP key (hexadecimal) is set.
- The stealth function is enabled.
* A wireless LAN router function for refusing connections if the device trying to connect has "ANY" or "blank" set for the SSID.
If it is necessary to change the settings on the wireless LAN router side
● If the wireless LAN router is set as follows, change the settings on the router side:
- MAC address filtering is set.
- WEP is selected or WPA/WPA2 encryption is set for the TKIP when communicating only with IEEE 802.11.
Troubleshooting
Specify the following settings again.
Setting Up the Connection Using WPS Push Button Mode(P. 26)
Setting Up the Connection Using WPS PIN Code Mode(P. 27)
Setting Up Connection by Selecting a Wireless Router(P. 28)
Setting Up a Connection by Specifying Detailed Settings(P. 29)
916
Setting Up a Connection by