Canon imagerunner advance C5550i User Manual page 202

Press when moving the fax number field cursor (
<Tone>
If you press this button, the character "T" (tone) is inserted. Even if you are using pulse dial, numbers
following "T" will be sent using tone dial.
<R> key
If the machine is connected to a PBX (Private Branch Exchange), press this button before entering the
destination. If this button is not available, you need to register the R-key settings.
Setting>(P. 786)
<Space>
Enter a blank space between numbers to make them easier to read.
<Pause>
If you press this button, the character "P" (pause) is inserted. When sending a fax overseas, insert
pauses after the international access code or fax number. This helps to improve the connection.
2
Press <Set Details> and specify settings as necessary.
<Subaddress>/<Password>
Specify when sending or receiving documents to increase security by attaching a subaddress and
password to all of your fax transactions.
<ECM TX>
Select <On> to correct image errors. Select <Off> if the recipient's fax machine does not support the
Error Correction Mode (ECM).
<Select Line>
If you have additional telephone lines, you can select the line to use for sending a fax.
<Long Distance>
If transmission errors occur frequently when you make overseas calls, select <Long Distance (1)>. If
errors persist, change the setting to <Long Distance (2)> or <Long Distance (3)>.
<Sending Speed>
Depending on the recipient's fax machine or the status of the line, a transmission error may occur due
to the transmission speed. If errors occur frequently, lower this setting value.
● To send faxes using ECM, set <Send>
TX> to <On>.
Basic Operations
) to the left or right.
Basic Operations for Sending Faxes(P. 319)
<Fax Settings>
190
<R-Key
<ECM TX> to <On> and set <ECM