Scanning with AirPrint
You can use AirPrint to transfer the data scanned by the machine directly to a Mac.
System Requirements
To scan with AirPrint, you need a Mac with Mac OS X 10.9 or later installed.
Network Environment
You need one of the following environments.
●
The Mac and the machine are connected to the same LAN.
●
The Mac and the machine are connected via USB.
●
For scanning, it is required to set <Use Network Link Scan> to <On>.
Available with AirPrint(P. 395)
●
Before scanning, it is required to put the machine into online state. When the auto online function (
Online for Remote Scan(P. 712) ) is set to <Off>, first put the machine into online state by tapping <Scan>
<Remote Scanner>, then start the procedure for scanning.
●
You cannot scan while settings for printing, copying, or faxing are being made, or while the machine is
performing an operation whatsoever.
Scanning from the Mac
1
Make sure that the machine is turned ON and that it is connected to the Mac.
●
For how to make sure of this, see "Getting Started."
2
Add the machine to your Mac from [System Preferences]
●
This operation is not necessary if the registration has already been performed for printing or faxing.
3
Select this machine from the list of printers in [Printers & Scanners].
4
Click [Scan].
Can Be Used Conveniently with a Mobile Device
401
Changing the Setting of Functions
Manuals Included with the Machine(P. 873)
[Printers & Scanners].
0UWX-0HK
Auto