Canon imagerunner advance C5550i User Manual page 70

<Check NTP Server>
You can check the communication status between a registered server and the SNTP. When a connection is
made properly, "OK" is displayed. However, only the communication status is confirmed and time
adjustment is not carried out.
● To perform time synchronization via SNTP with the NTP server, setting the time zone where the
machine is used is required in advance.
4
Press <OK>.
5
Press
Monitoring the Machine From Device Management Systems
When device management software such as iW Management Console is employed, you can collect/manage various
information such as setting information, address information, and device failure information on the network through
the server.
1
Press .
2
Press <Preferences>
Settings>.
3
Set <Response> to <On>, press <Scope Name> and enter a scope name.
● Enter a scope name specified using Multicast Discovery Settings in <Scope Name>.
4
Press <OK>.
5
Press
LINKS
<Network>(P. 741)
Setting Up
<Apply Set. Changes>
<Network>
<Apply Set. Changes>
Setting the Date/Time(P. 17)
<Yes>.
<TCP/IP Settings>
<Yes>.
58
<Multicast Discovery