◼
#001
Different size originals were scanned without setting the Different Size Originals mode.
●
Check the originals and the settings and scan the originals again.
◼
#003
Communication that exceeds the specified time (64 minutes) causes an error.
●
Lower the resolution and try sending again.
Basic Operations for Sending Faxes(P. 319)
●
When receiving a document, ask the other party to lower the resolution when scanning or divide the
document into multiple parts.
◼
#005
There was no response from the other party for 35 seconds.
●
Check that the other party can communicate, and try sending again.
The device of the other party is not a model that supports G3.
●
Check the device of the other party.
◼
#009
Paper has run out.
●
Load paper.
Loading Paper(P. 112)
The paper deck/paper drawer is not inserted correctly.
●
Insert the paper deck/paper drawer in all the way.
Loading Paper in the Paper Drawer(P. 114)
◼
#010
Paper has run out.
●
Load paper.
Loading Paper(P. 112)
◼
#011
The document to send was not placed correctly.
●
Place the original correctly and try sending again from the start of the procedure.
◼
#012
Could not send because the device of the other party does not have any paper.
●
Tell the other party to load paper.
Troubleshooting
956