1
Press <Erase Book Frame> and check <Original Size>.
●
If the size displayed in <Original Size> is different from the size of the book, press <Change> to select
the size.
2
Press <Center> or <Sides> and enter each erasing width.
Erasing punch holes in copies of documents
1
Press <Erase Binding> and select the punch hole location.
2
Enter the erasing width.
●
If you want to adjust the width for each border independently, press <Erase Original Frame> or
<Erase Book Frame>, and then press <Adjust Independently> to enter the erasing widths.
3
Press <OK>
<Close>.
5
Press
.
➠
Originals are scanned and sending starts.
●
To cancel scanning, press <Cancel> or
When <Press the [Start] key to scan the next original.> is displayed
Place the next original to scan and press
Sending> to send the fax.
●
To cancel sending, press <To Status Mntr./Cncl.>
Faxing
<Yes>.
. When scanning all of the originals is complete, press <Start
select a document
330
<Cancel>
<Yes>.