The number of search results exceeds the limit. Change search conditions, then try
again.
Destinations exceeding the maximum number of search results were found.
●
Narrow the search conditions and try searching again.
●
Increase the maximum number of search results in <Max Addresses to Search> in <Register LDAP Server>.
Registering the LDAP Server(P. 49)
The search condition includes characters that cannot be used with the selected server.
"\" is used in the search conditions.
●
Remove the "\" from the search conditions and try searching again.
If an uneven number of "(" or ")" are included or an "*" is included inside parentheses, search conditions
are not established.
●
Set a correct combination of characters, and try searching again.
If <LDAP Server Version and Character Code> is set to <ver.2(JIS)>, only ASCII code (0x20 to 0x7E)
characters can be used.
●
Remove the invalid characters and try searching again.
An error occurred when verifying.
The certificate is invalid.
●
Register the correct certificate and specify the settings again.
Configuring the Key and Certificate for TLS(P. 604)
Registering a Key and Certificate for Network Communication(P. 666)
This CRL is invalid.
The certificate revocation list (CRL) may be corrupt, or a signing algorithm not supported by the machine
may be used.
●
Register the correct certificate revocation list (CRL).
Registering a Certificate Revocation List (CRL)(P. 670)
This CRL has expired.
The start date for the certificate revocation list (CRL) may be set to a date in the future.
●
Check the start date of the certificate registered in the machine. If the start date is set to a date in the
future, use the certificate on a day after that date.
Registering a Certificate Revocation List (CRL)(P. 670)
The date and time set on the machine may be incorrect.
●
Check the date and time setting of the machine.
Setting the Date/Time(P. 17)
This application does not support the security policy function.
The MEAP application you tried to start may not operate according to the security policy settings of the
machine.
Troubleshooting
936