Canon imagerunner advance C5550i User Manual page 709

[Backup Data Capacity]/[Backup Location Available Space]
If [Backup Location Available Space] is not enough for [Backup Data Capacity], set a different backup
destination.
[Backup Method]
Select [All] to perform standard backup. If you only want to back up the data that has been changed since
the previous backup, select [Changes].
● Backup can be performed a limited number of times in the same folder. If backup can no longer be
performed, specify a different backup destination folder.
● [Changes] for Advanced Box backs up only the data updated or added since all the stored data was backed
up. [Changes] always backs up data based on differences from [All] as opposed to the last [Changes]
backup.
● After performing backup, you can click [Back Up/Restore Log] on the screen displayed in step 7, and check
the results of the backup in [Result].
● If the [A server error has occurred.] message is displayed, the network settings may not be configured
properly. Check the network settings.
● The backed-up data can be restored not only to the machine but also to upgrades of the same model.
Restoring Backup Data
1
Start the Remote UI.
2
Click [Settings/Registration] on the portal page.
3
Click [Data Management]
Managing the Machine
Starting the Remote UI(P. 648)
[Restore].
697
Remote UI Screen(P. 649)