Canon imagerunner advance C5550i User Manual page 761

Specify the time before communication is automatically terminated when there is a prolonged period of no data
transmission/reception while communicating using direct connection (access point mode).
<Access Point Mode Settings>
<Preferences> <Network>
Specify the settings for access point mode.
<IP Address Settings for Direct Connection>
<Preferences> <Network>
Specify the IP address to distribute to mobile devices connecting using direct connection (access point mode).
● The IP address distributed to mobile devices may be up to nine numbers greater than the value of the
specified IP address.
<Use Login Name as User Name for Print Jobs>
<Preferences> <Network>
Specify whether to display the login name as the user name of print jobs that are printed using direct
connection (access point mode).
<Use Bluetooth>
<Preferences> <Network>
Specify whether to use a Bluetooth connection.
● If you set this to <On>, <Compensate for Network Comm.> is enabled when <Low> is selected in
<Sleep Mode Energy Use>.
<Set Device Name/PIN Code>
<Preferences> <Network>
Specify the device name of the machine to notify by Bluetooth and the PIN code to use for pairing.
<Connection Timeout>
<Preferences> <Network>
Specify the timeout time for pairing when a Bluetooth device is detected.
<Display MAC Address>
<Preferences> <Network>
Displays the Bluetooth MAC address of the machine.
Settings/Registration
<Direct Connection Settings>
<Direct Connection Settings>
<Direct Connection Settings>
<Bluetooth Settings>
<Bluetooth Settings>
<Bluetooth Settings>
<Bluetooth Settings>
749