Linking with Mobile Devices (imageRUNNER 2204F / 2204N / 2004N)
Scanning with AirPrint
You can use AirPrint to transfer the data scanned by the machine directly to a Mac.
System Requirements
To scan with AirPrint, you need a Mac with Mac OS X 10.9 or later installed.
Network Environment
You need one of the following environments.
●
The Mac and the machine are connected to the same LAN.
●
The Mac and the machine are connected via USB.
●
For scanning, it is required to set <Use Network Link Scan> to <On>.
Available with AirPrint(P. 266)
●
Before scanning, it is required to put the machine into online state. When the auto online function (
System Management Settings(P. 465) ) is set to <Off>, first put the machine into online state by tapping
<Scan>
<Remote Scanner>, then start the procedure for scanning.
●
You cannot scan while settings for operations are being made, or while the machine is performing any
operation whatsoever.
Scanning from the Mac
1
Make sure that the machine is turned ON and that it is connected to the Mac.
●
For how to make sure of this, see "Getting Started."
2
Add the machine to your Mac from [System Preferences]
●
This operation is not necessary if the registration has already been performed for another operation.
3
Select this machine from the list of printers in [Printers & Scanners].
4
Click [Scan].
Changing the Setting of Functions
Manuals Included with the Machine(P. 596)
272
[Printers & Scanners].
1053-0AJ