Canon imagerunner advance C5550i User Manual page 626

3
Set <Use IEEE 802.1X> to <On>, configure the necessary settings, and press <Next>.
<Login Name>
Enter the name (EAP Identity) of the login user to receive IEEE 802.1X authentication.
<Verify Authentication Server Name>
To verify a common name in the server certificate, select <On> in <Verify Authentication Server Name>,
and enter the name of the authentication server registered by the login user in <Authentication Server
Name>.
4
Select the authentication method and configure the necessary settings.
Selecting EAP-TLS
1
Press <On> for <Use TLS>, and press <Key and Certificate>.
2
In the list, select the key and certificate to use, and press <Set as Default Key>
3
Press <OK>.
Selecting EAP-TTLS
1
Press <On> for <Use TTLS>.
2
Select <MSCHAPv2> or <PAP>, and press <OK>.
3
Enter the user name and password.
● Press <User Name> or <Password>, and enter the information. If you enter a name for <User Name>,
disable <Same User Name as Login Name>.
● If you want to set <User Name> to the same login name that was entered in step 3, press <Same User
Name as Login Name>.
● <Confirm> is displayed when you enter a password and press <OK>. For confirmation, enter the
password again and press <OK>.
Managing the Machine
614
<Yes>.