Cleaning The Platen Glass - Canon imagerunner advance C5550i User Manual

Cleaning the Platen Glass

If the platen glass is dirty, originals may not be scanned clearly, or the size of the original may not be detected clearly.
1
Turn the power OFF, and remove the power plug from the power outlet.
Turning OFF the Machine(P. 91)
● Check the operation status of the machine before turning the power OFF. You can turn the power OFF
even if the machine is executing an operation, but this may cause the operation to be interrupted or
data to become damaged.
2
Open the feeder.
3
Wipe the reverse side of the feeder and the platen glass.
Wipe the platen glass.
● Wipe the platen glass with the included cleaning cloth.
Wipe the reverse side of the feeder.
● If you cannot remove the dirt, wet a soft cloth with water and wring it out well, then wipe the
reverse side of the feeder with it. Afterwards, wipe the reverse side of the feeder with a soft
and dry cloth. Wait until the moisture has completely dried before proceeding to the next
step.
Maintenance
829
13WK-0KS