◼
#080
A subaddress is not set in the device of the other party.
●
Check the subaddress of the other party, and try sending again.
◼
#081
A password is not set in the device of the other party.
●
Check the password of the other party, and try sending again.
◼
#082
Polling transmission is not configured in the device of the other party.
●
Tell the other party to configure polling transmission, and perform polling reception again.
◼
#083
The subaddress and password of the machine and the device of the other party did not match when
performing polling reception.
●
Check that the subaddress and password of the machine and the device of the other party match, and try
sending again.
◼
#084
Cannot perform polling reception because the password is not supported by the device of the other
party.
●
Perform polling reception without using a password.
◼
#099
The operation was canceled before it was complete.
●
Perform the operation again.
An error occurred because the power of the machine was turned OFF while it was operating.
●
Check whether the power is turned ON, and perform the operation again, if necessary.
Turning ON the Machine(P. 90)
◼
#102
The subaddress and password do not match.
●
Check the subaddress and password of the other party, and try sending again.
◼
#701
The Department ID does not exist, or the PIN was changed.
Troubleshooting
959