1
Press <Erase Book Frame> and check <Original Size>.
●
If the size displayed in <Original Size> is different from the size of the book, press <Change> to select
the size.
2
Press <Center> or <Sides> and enter each erasing width.
Erasing punch holes in copies of documents
1
Press <Erase Binding> and select the punch hole location.
2
Enter the erasing width.
●
If you want to adjust the width for each border independently, press <Erase Original Frame> or <Erase
Book Frame>, and then press <Adjust Independently> to enter the erasing widths.
6
Press <OK>
7
Press
.
➠
Originals are scanned and sending/saving starts.
LINKS
Scanning a Facing Page Original and Storing/Sending it as Two Separate Pages(P. 435)
<Close>.
Scanning
431