Table of Contents
Advertisement
Scanning with AirPrint
You can use AirPrint to transfer the data scanned by the machine directly to a Mac.
System Requirements
To scan with AirPrint, you need a Mac with OS X 10.9 or later installed. To scan using TLS, you need a Mac with
OS X 10.11 or later installed.
Network Environment
One of the following environments is required.
●
An environment where an Apple device and the machine are connected to the same LAN
●
An environment where a Mac is connected to the machine via USB
●
For scanning, it is required to set <Use Network Link Scan> to <On>.
Available with AirPrint(P. 343)
●
Before scanning, it is required to put the machine into online state. When the auto online function (
Online>(P. 490) ) is set to <Off>, first put the machine into online state by selecting <Scan>
Scanner>, then start the procedure for scanning.
●
You cannot scan while settings for operations are being made, or while the machine is performing any
operation whatsoever.
Scanning from a Mac
1
Make sure that the machine is turned ON and connected to the Mac.
●
For how to make sure of this, see
2
Add the machine to the Mac from [System Preferences]
●
If the machine has already been added, this operation is not required.
3
Select this machine from the list of printers in [Printers & Scanners].
4
Click [Scan].
Linking with Mobile Devices
Setting Up the Network Environment(P. 12) .
349
Changing the Setting of Functions
<Remote
[Printers & Scanners].
19YU-06H
<Auto
Advertisement
Table of Contents
