Canon imagerunner advance C5550i User Manual page 920

Hide thumbs Also See for imagerunner advance C5550i:

Table of Contents

Bleedthrough occurs.

Is the copy setting set appropriately?

By specifying the type of original, you can prevent the reverse side of an original from being copied.

Selecting the Type of Original for Copying(P. 223)

Images are not printed on the intended side of the paper.

Is the orientation of the loaded paper correct?

Check the orientation and side of the paper that is facing up. Load the paper again if it is incorrectly

Loading Paper(P. 112)

Images are not printed in the intended size.

Do the original size and size of the paper that is loaded match?

Replace the paper that is loaded with paper of the size you want to print on.

Match <Output Size> in the printer driver with the size of paper to print on.

The orientation does not match on both sides of the paper when using two-

sided printing.

Are the settings for two-sided printing correct?

Follow the procedure below to check the print settings.

Troubleshooting