Canon imagerunner advance C5550i User Manual page 128

Paper (excluding envelopes):
Envelopes:
● If you use paper with a logo mark, pay attention to the orientation when loading it in the paper source.
Loading Preprinted Paper(P. 130)
● When placing envelopes, pay attention to the orientation and the preparations before placing envelopes.
Loading Envelopes(P. 120)
● Each paper drawer holds up to 550 sheets of paper (80 g/m
● If there are instructions on the paper package about which side of the paper to load, follow those
instructions.
● Paper may overlap when it is fed or a paper jam may occur, depending on the cut surface of the paper.
Changing the paper orientation and loading it again may reduce the effect of the cut surface.
● Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight.
● If paper runs out and printing is stopped, load a new paper stack. Printing restarts after the new paper
stack is loaded.
● If you print on the paper which has absorbed moisture, steam may come out from the output area of the
machine. This is because the moist on the paper evaporates when the high temperature is applied when a
toner is fixed to the paper. It is not a malfunction. (This especially happens in low room temperature.)
5
Gently insert the paper drawer into the machine.
When changing the paper size and type
● If you load a different type of paper into the machine, make sure to change the settings. If you do not
change the settings, the machine cannot print properly.
Drawer(P. 138)
● When changing the paper size, change the paper size label as necessary.
LINKS
Specifications(P. 1029)
Basic Operations
2
).
Specifying Paper Size and Type in the Paper
116