Canon imagerunner advance C5550i User Manual page 621

4
Specify a name for the policy.
● Press <Policy Name>, enter the name, and press <OK>.
5
Configure the IPSec application parameters.
1
Press <Selector Settings>.
2
Specify the IP address to apply the IPSec policy to.
● Specify the IP address of this machine in <Local Address>, and specify the IP address of the
communication peer in <Remote Address>.
<All IP Addresses>
<IPv4 Address>
<IPv6 Address>
<All IPv4 Addresses>
<All IPv6 Addresses>
<IPv4 Manual Settings>
<IPv6 Manual Settings>
Managing the Machine
IPSec is applied to all sent and received IP packets.
IPSec is applied to IP packets sent to and received from the IPv4 address of this
machine.
IPSec is applied to IP packets sent to and received from the IPv6 address of this
machine.
IPSec is applied to IP packets sent to and received from the IPv4 address of the
communication peer.
IPSec is applied to IP packets sent to and received from the IPv6 address of the
communication peer.
Specify the IPv4 address to apply IPSec to.
● Select <Single Address> to enter an individual IPv4 address.
● Select <Address Range> to specify a range of IPv4 addresses. Enter a separate
address for <First Address> and <Last Address>.
● Select <Subnet Settings> to specify a range of IPv4 addresses using a subnet
mask. Enter separate values for <Address> and <Subnet Mask>.
Specify the IPv6 address to apply IPSec to.
● Select <Single Address> to enter an individual IPv6 address.
● Select <Address Range> to specify a range of IPv6 addresses. Enter a separate
address for <First Address> and <Last Address>.
609