●
Fan all four sides of the paper stack well.
●
Make sure that there is enough air between them.
4
Insert the paper into the multi-purpose tray until the paper stops.
●
Load the paper with the print side face down.
●
Fan the paper stack well, and tap it on a flat surface to align the edges.
➠
The screen for specifying the paper size and type is displayed when the paper is fully inserted.
Do not exceed the load limit line when loading paper
●
Make sure that the paper stack does not exceed the load limit line (
cause paper jams.
●
If you use envelopes or paper with a logo mark, pay attention to the orientation when loading them in the
paper source.
Loading Envelopes(P. 120)
Loading Preprinted Paper(P. 130)
●
Feed coated paper one sheet at a time.
●
When you load tab paper into the multi-purpose tray, load reverse order tab paper face down, with the
tabs facing the opposite direction of the feeding direction.
Basic Operations
118
). Loading too much paper can