Entering Sleep Mode - Canon imagerunner advance C5550i User Manual

Hide thumbs Also See for imagerunner advance C5550i:

Table of Contents

Entering Sleep Mode

The sleep mode function reduces power consumption by temporarily disabling some internal operations of the

machine. You can put the machine into sleep mode simply by pressing

in sleep mode, the touch panel display turns off and

The machine may not enter sleep mode depending on the machine's operation status and conditions.

You can set the order for starting necessary functions when you perform operations after exiting sleep

<Sleep Mode Eco Exit>(P. 740)

Exiting Sleep Mode

If <Use Motion Sensor> (Settings/Registration) is set to <On>, the machine exits sleep mode automatically when

a person is nearby.If the machine does not exit sleep mode, press

When You Want to Set the Auto Sleep Timer

You can use the <Auto Sleep Time> setting to automatically put the machine into sleep mode. If you want to

change the amount of time that elapses before the machine enters auto sleep mode, follow the procedure

amount of time that elapses before the machine automatically enters sleep mode

Energy Consumption in Sleep Mode

You can set the amount of energy that the machine consumes when it is in sleep mode. Follow the procedure

below to set the amount of energy consumed in sleep mode.

For information on the location of the motion sensor, see

Basic Operations

Front Side(P. 76) .

on the control panel. When the machine is

<Use Motion Sensor>(P. 740)

set <Sleep Mode Energy Use> to <Low> or