●
Place the test page with the print side facing down, making sure that the gray stripe is facing the left edge of
the machine.
6
Press <Start Scanning>.
●
The machine starts scanning the test page.
Creating a Color Adjustment Standard
You can create and register an adjustment standard of your choice. Up to four adjustment standards can be
registered.
1
Press
<Adjustment/Maintenance>
Color Tone Settings>.
2
Press <Register Correction Pattern>
●
If you have not performed auto gradation adjustment (full adjustment), press <No> to execute it.
Adjusting Gradation(P. 871)
3
Select the destination to register the new adjustment standard
4
Select the paper, press <Next>
5
Press <Start Printing>.
●
A test page is printed.
6
Place the test page on the platen glass.
●
Place the test page with the print side facing down, making sure that the gray stripe is facing the left edge of
the machine.
7
Press <Start Scanning>.
●
The machine starts scanning the test page.
Maintenance
<Adjust Image Quality>
<Yes>.
select the paper source, and press <OK>.
875
<Auto Correct
press <Next>.