Canon imagerunner advance C5550i User Manual page 304

Hide thumbs Also See for imagerunner advance C5550i:

Table of Contents

Touch two opposing points with the edit pen to specify a rectangular area. Specify an area that encloses the

area you want to copy in a rectangle.

Two opposing points to enter

The area to copy

To cancel a point you have specified, press <Delete Point>. To delete the area after you have specified it,

press <Clear Area>.

If it is difficult to specify the area because the image displayed on the preview screen is small, press <100%

> to enlarge it. You can press

want to display.

If it is difficult to specify an area because the space between text or images is small, press <Fine Adjust> to

perform fine adjustment of the area. You can move the position of an individual point by selecting the

desired <Move Point> button after selecting one of the corner points by pressing the <Select Point>.

You can specify up to four areas. After specifying the first area, press

specify the second and subsequent areas.

If the area of a specified area is too small, the color information of the original may not be correctly detected,

and the copy may be output in black and white.

Press <Framing>

If you press <Framing>, the specified areas are copied.

If you press <Blanking>, the contents outside the specified areas are copied.

after selecting the zoom ratio to move to the location you