Load Paper - Canon imagerunner advance C5550i User Manual

Check the user name, password, or settings.
An incorrect user name or password was set for the LDAP server authentication information.
● Check whether the user name and password in <Register LDAP Server> are correct.
Registering the LDAP Server(P. 49)
An incorrect domain name was set for the LDAP server authentication information.
● Check whether the domain name in <Register LDAP Server> is correct.
Registering the LDAP Server(P. 49)

Load paper.

The paper in the paper source has run out.
● Load paper in the paper source displayed on the touch panel display.
Loading Paper(P. 112)
The paper guides in the paper source are in the wrong position.
● Adjust the paper guides according to the edges of the paper. Depending on the cut edge of the paper,
multiple sheets of paper may be fed together when printing, which can cause paper jams. This can be
reduced by changing the orientation of the loaded paper.
The paper settings differ from the paper that is loaded.
● Check the paper settings in <Consumables/Others> in
them with the paper that is loaded. Paper settings can be specified for all the paper sizes and types set in
the paper drawers and multi-purpose tray in
Specifying Paper Size and Type(P. 137)
The paper settings of the driver or application differ from the paper that is loaded.
● Check the paper settings on the <Printing Preferences> screen of the printer driver, and if the paper
settings are incorrect, match them with the paper that is loaded.
Scanning was canceled because the data size of the scanned original exceeds the limit.
Scanning may be possible if sharpness is reduced, or Original Type is set to Text.
Scanning was canceled because the data of the scanned document exceeded the maximum size that can
be handled by the machine.
● You may be able to scan by lowering the setting in <Sharpness>, and setting <Original Type> to <Text>.
Login failed. Anonymous access to the authentication server is not allowed. Contact the
system manager.
Anonymous access is not allowed in the LDAP server.
● Select the check box in <Use authentication information> on the screen for entering information on the
LDAP server, and set the user name and password according to the information registered in the LDAP
server.
Registering Server Information(P. 565)
Troubleshooting
. If the paper settings are incorrect, match
<Preferences>
953
<Paper Settings>.