Step 12
Complete the Setup Guide.
When finishing the Setup Guide, restart the machine to apply the specified settings.
●
If you do not use the Setup Guide, press <End Setup Guide> in Step 1.
◼
Starting the Setup Guide later
The Setup Guide cannot be started in the following cases.
●
If the user authentication or department ID authentication is set.
●
If the DepartmentID Authentication is set.
●
If the authentication with a card is performed.
<Management Settings>
●
If you start the Setup Guide later and log in as an administrator, Step 4 will not be displayed. Proceed to Step
5.
Setting Up
●
When printing is complete, or if you do not print a list, press <OK>.
●
Press <OK> to restart the machine.
<License/Other>
<Start Setup Guide>
14
<Enable>