Canon imagerunner advance C5550i User Manual page 32

Hide thumbs Also See for imagerunner advance C5550i:

Table of Contents

Depending on the utility software, communication may fail if <Sleep Mode Energy Use> is set to <Low>.

Return the machine from sleep status by pressing the energy saver key, or set <Sleep Mode Energy Use> to

<Compensate for Network Comm.>.

Adapting to the Network Environment(P. 38)

Select a wired LAN or wireless LAN for connection.

Selecting Wired or Wireless LAN(P. 22)

Connect the machine to a router.

Is the LAN cable connector plugged into the proper place securely? Insert the

connector until it clicks.

For a wireless LAN connection, check the connection between the machine and the

Connecting to a Wired LAN(P. 23)

Connecting to a Wireless LAN(P. 24)

Set an IP address as necessary.

Normally, an IP address is automatically allocated by DHCP, so this setting is not

necessary. If you want to use a specific IP address or change the protocol of the

automatic setting of an IP address from DHCP (initial setting) to another, this setting is

Setting an IP Address(P. 32)

Confirm that proper connection is completed.

Start the Remote UI from a computer (

Remote UI screen is displayed, the connection is completed.

<Sleep Mode Energy Use>(P. 739)

Starting the Remote UI(P. 648) ). If the