Instrument Settings Setup Menu - Thermo Scientific Orion Star A320 Series Manual

Thermo Scientific

Instrument Settings Setup Menu

Use the Instrument Settings menu to update meter settings for data transfer, data log, date and
time, language, sounds, display contrast, auto-shutoff, user ID and sample ID.
Instrument
Options
Setting
· Printing
Off
· Comm Setup
RS232 USB
· Data Format
Export Data
Printer PC (CSV)
· Comm Config
1200
2400
4800
· Off
Data Log
· On
· Date
DD/MM/YY
MM/DD/YY
Date: 01/01/12
Date and Time
· Time
12 Hour Clock
Time: 02:30 PM
24 Hour Clock
Time: 14:30
· English
· Español
· Deutsch
Language
· Français
· Italiano
· 中文(Chinese)
· Off
Key Press Beep
· On
· Off
Alarm Beep
· On
Contrast
· Off
Auto Shut Off
· On
User ID ABCDE
· Off
Sample ID
· Manual
· Auto Increment
Details
Access the data export menu to set data transfer
On
settings for exporting measurement and calibration
information to a printer or computer
Turn printing on to allow data transfer from the meter to
an external device, select the data transfer format as
printer (standard text) or PC (comma delimited text)
and set the meter baud rate to match the printer or
computer baud rate
9600
The meter will automatically detect when an RS232 or
19200
USB cable is connected to a meter port
38400
Turn data logging on to save measurement data to the
data log according to the selected read type
Use the date setting to select the date format as
day/month/year (DD/MM/YY) or month/day/year
(MM/DD/YY) and then enter the month, day and year
values
Use the time setting to set the time format as 12 hour
clock or 24 hour clock and then enter the hour and
minute values
Set the language to be used for the meter interface,
additional languages (including Portuguese and
Korean) are available with software updates on our
website at www.thermoscientific.com/OrionMeters
Turn the audible beep on or off each time a meter key
is pressed
Turn the audible beep on or off when an alarm is
triggered
Adjust the display contrast higher or lower to improve
display viewing in different light conditions
Turn on function to automatically power off the meter
when no keys are pressed for 20 minutes
Enter a user ID value (up to six characters) using the
alphanumeric entry screen
Set sample ID as off, manual (up to six alphanumeric
characters) or auto incremental (up to six numbers that
are automatically increased for each measurement)
Orion Star A320 Series Portable Meter User Manual
Chapter 3 Meter Setup Menus
|
51
|