Operation; Operation Overview; Figure 5: Odalog L2 Menu Map - Thermo Scientific Odalog L2 Series User Manual

OdaLog® L2 – Gas Logger User Manual
6.

OPERATION

6.1. Operation Overview

MANUAL LOGGING
(SET IN SOFTWARE)
RELEASE BUTTON ON START/
STOP LOG SCREEN TO ENABLE/
DISABLE LOGGING MODE
NOTE: IN 'MANUAL LOGGING' MODE,
THE LOG MUST BE STOPPED
BEFORE THE INSTRUMENT CAN
BE TURNED INTO 'IrDA' OR 'OFF'
MODES
RELEASE AFTER
'OFF" COUNT
DOWN

Figure 5: Odalog L2 Menu Map

P/N: 10-1000
AUTO LOGGING
(SET IN SOFTWARE)
HOLD BUTTON
HOLD BUTTON
RELEASE
BUTTON
START-UP SCREEN SEQUENCE
RELEASE
BUTTON
(AUTO-LOG ON)
(BLOCK SCREEN)
NOTE:
NOTE:
Revision G, January 2024
(AUTO RETURN TO 'INST' SCREEN)
AUTO SCROLL OF STATUS SCREENS
PRESSING BUTTON DURING AUTO-SCROLL WILL PAUSE AT THE CURRENT SCREEN FOR 5
SEC
HOLDING BUTTON DOWN WILL PAUSE AT THE CURRENT SCREEN UNTIL 5 SEC AFTER
BUTTON IS RELEASED
Page | 9