14. The Run Installation screen will be displayed.
15. Confirm that the program sequence listed in the Command line is
your drive\DRIVER\TWAIN\OTHER\Setup.exe and then click
on the Finish key.
16. The Type 450 TWAIN Driver ver.2 program will be initiated.
17. At the Welcome screen, click on the Next key.
18. At the Software License screen, click on the Yes key.
19. The Select Program screen will be displayed.
20. Confirm that Type 450 TWAIN Driver Ver.2 is selected and then,
click on the Next key.
21. The Question screens will be displayed.
SM
SOFTWARE INSTALLATION PROCEDURE
21-15
A230/A231/A232