Ricoh A230 Service Manual page 297

[B]
[A]
19. Reinstall the front scanner rail and rear scanner rail.
20. Install the 1st scanner and adjust its position with the scanner positioning tools
(P/N A0069104) [A].
21. Secure the 1st scanner with the scanner wire bracket [B] (1 screw).
22. Tighten the tension bracket [C].
23. Secure the scanner wire pulley [D] (1 Allen screw).
24. Remove the positioning tools. After sliding the scanner to the right and left
several times, set the positioning tools to check the scanner wire bracket and
tension bracket again.
25. Reassemble the scanner and do the scanner and printer copy adjustments
(see Replacement and Adjustment – Copy Adjustments).
SM
[A]
[C]
6-11
SCANNER UNIT
[D]
A230R113.WMF
A230/A231/A232