Table of Contents
Advertisement
AUTO REVERSE DOCUMENT FEEDER INSTALLATION
3.8.2 INSTALLATION PROCEDURE
A231I506.WMF
CAUTION
Unplug the main machine power cord before starting the following
procedure.
1. Unpack the ARDF. Then remove the tapes on the exterior of the ARDF.
2. Tighten the two stud screws [A].
3. Mount the ARDF by aligning the screw holes [B] in the ARDF over the stud
screws, and slide the ARDF to the front as shown.
NOTE: When mounting the ARDF, hold it by hand as shown in the illustration.
Holding it in another way may damage the ARDF.
4. Secure the ARDF (2 knob screws [C]).
A230/A231/A232
[B]
3-32
[A]
[A]
A230I202.WMF
[C]
SM
Advertisement
Table of Contents
Troubleshooting
