Ricoh A230 Service Manual page 165

1-BIN TRAY UNIT INSTALLATION
2. Unpack the 1-bin tray unit and remove the tapes.
3. Remove the paper exit cover [A] (4 screws).
Do step 4 only if the duplex unit has been installed or will be installed.
4. Cut away two covers [B] from the base cover [C].
NOTE: Trim off any remaining unevenness from the edges.
5. Install the base cover (3 stepped screws).
6. Place the 1-bin tray unit [D] on the base cover.
NOTE: Make sure to hold the 1-bin tray unit at both sides, never at the center.
A230/A231/A232
A231I504.WMF
A231I505.WMF
[A]
[D]
3-24
[C]
A230I491.WMF
[B]
SM