Ricoh A230 Service Manual page 767

BIT SWITCHES
Printer Switch 0E
No FUNCTION
0 Paper size selection priority
0: Width
1: Length
1 Paper size selected for
printing A4 width fax data
0: 8 x 11" size
1: A4 size
2 Page separation
0: Enabled
1: Disabled
3 Printing the document image
to
on reports
4 Bit 4 Bit 3 Setting
0 0
0 1
1 0
1 1
5
Not used
to
6
7 Equalizing the reduction rate
among separated pages
(Page Separation)
0: Enabled
1: Disabled
A230/A231/A232
0: A paper size which has the same width as
the received data is selected first.
1: A paper size which has enough length to
print all the received lines without reduction is
selected first.
This switch determines which paper size is
selected for printing A4 width fax data, when the
machine has both A4 and 8" x 11" size paper.
1: If all paper sizes in the machine require page
separation to print a received fax message, the
machine does not print the message (Substitute
Reception is used).
After a larger size of paper is set in a cassette,
the machine automatically prints the fax
message.
"Same size" means the document image is
printed at 100%, even if page separation
occurs.
The upper half
only
50% reduction
of sub scan
Same size
Not used
Do not change the settings.
0: When page separation has taken place, all
the pages are reduced with the same reduction
ratio.
1: Only the last page is reduced to fit the
selected paper size when the page separation
has taken place. Other pages are printed
without reduction.
COMMENTS
4-42
SM