Ricoh A230 Service Manual page 374

ROM HISTORY
Description of Modification
Corrects the following:
•
To improve copy quality
(Medaka), the default value of
the following SP modes has
been changed. Sp2001-1 1650v
to 1620v and SP2005-3 1650v
to 1620v.
•
Machine may not reach stand-by
mode condition after main
switches are turned on of after
jam removal due to no zero
cross signal detection. Fix -
SC547 or SC542 will be
generated.
•
When changing the value of
SP6105 (staple position
adjustment) and SP6113 (punch
hole position adjustment) to a
minus value, then turning the
machine OFF and ON, the data
is not sent to the finisher.
•
If the electrical counter value is
a minus condition, the counters
for the fax option do not
increment.
Specification change:
•
When A3 or B4 paper size is
selected in rotate sort (or stack)
mode, the machine will copy
with normal sort (or Stack)
mode.
•
Electrical total counter value of
brand-new machine has been
changed from –2000 to –5000.
•
During multiple copying and no
HDD option installed, the
machine can scan originals for
fax transmission.
•
Improved copy quality of light
original mode. Gamma curve
for the original mode has been
changed.
•
SC900-01 will be generated
when the mechanical counter is
disconnected.
A230/A231/A232
Firmware Level
A2325113 G
7-28
Serial Number
May 1998
production.
Rev. 06/99
Firmware
Version
13.6.3 na
SM