Modem Test (Function 11) - Ricoh A230 Service Manual

SERVICE LEVEL FUNCTIONS

4.1.17 MODEM TEST (FUNCTION 11)

Refer to section 4.1.18 for V.8 and V.34 tests.
NOTE:
1. Enter the fax service mode.
2. Press . .
3. Press one of the following numbers:
. – Modem test (analog line)
0 – Modem test (ISDN line)
NOTE: An optional ISDN interface is required
to test a modem on an ISDN line.
4. Press .
5. Choose a modem signal type at the
keypad, then press !
To stop, press $.
6. Exit the service mode.
4.1.18 V.34 MODEM TEST (FUNCTION 11)
1. Enter the service mode.
2. Press . . then .
3. Press 2.
4. Press a symbol rate and a data rate, then
press OK.
. – Select a symbol rate
/ – Select a data rate
5. Press "Start" to start the test.
To stop the test, press "Stop".
6. Exit the service mode.
A230/A231/A232
4-10
A233M529.tif
A233M530.tif
A233M531.tif
A233M540.tif
A233M541.tif
A233M542.tif
SM