Ricoh A230 Service Manual page 1078

Tech Service Bulletin No. A230/A231/A232 – 042
Page 2 of 2
GENERAL:
The following parts updates are being issued for all A230, A231 and A232 Parts Catalogs. Please update
your Parts Catalogs with the following information.
OLD PART NO. NEW PART NO.
AA080231
A2323882
NOTE: The description for the Transfer Belt Frame was listed as "Flange – Transfer Belt". Please correct
"Flange" to "Frame"
NOTE: The old style Frame is not available. You must visually inspect the Frame to see which style you
have . See Diagram B on previous page. If you have the old style Frame, you must replace as a
set.
UNITS AFFECTED:
All A230, A231 and A232 copiers manufactured after the Serial Numbers listed below will have the new style
Bias Roller Bushing and Transfer Belt Frame installed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
AA080246 Bushing – Bias Roller
A2323882 Frame – Transfer Belt
MODEL NAME
Gestetner 3235s
Gestetner 3235
Gestetner 3245
Ricoh AFICIO 340
Ricoh AFICIO 350
Ricoh AFICIO 450
Savin 9935D
Savin 9935DP
Savin 9945DP
DESCRIPTION
SERIAL NUMBER
1B88850001
1B998850001
2B18850001
A7688850096
A7698850855
A7708850642
1B88850001
1B998850001
2B18850001
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
REFERENCE
QTY PAGE ITEM
3/S 41 26
3/S 41 35