Ricoh A230 Service Manual page 1113

BULLETIN NUMBER: BULLETIN NUMBER: BULLETIN NUMBER: BULLETIN NUMBER:
APPLICABLE MODEL: : : : APPLICABLE MODEL
APPLICABLE MODEL APPLICABLE MODEL
GESTETNER – 3235S/3535/3245 GESTETNER – 3235S/3535/3245 GESTETNER – 3235S/3535/3245 GESTETNER – 3235S/3535/3245
RICOH – AFICIO 340/350/450 RICOH – AFICIO 340/350/450 RICOH – AFICIO 340/350/450 RICOH – AFICIO 340/350/450
SAVIN – 9935D/9935DP/9945DP SAVIN – 9935D/9935DP/9945DP SAVIN – 9935D/9935DP/9945DP SAVIN – 9935D/9935DP/9945DP
SUBJECT: LASER SYNC. DETECTOR
SYMPTOM:
An SC322 or SC326 is generated during installation.
CAUSE:
The Laser Unit may pass when tested at the factory, but the laser beam in some units may be near the
lower edge of the Laser Sync. Detector. During transport of the unit, the LD Unit Housing may become
slightly deformed or shifted due to some form of shock. As a result, the position of the Laser has shifted
outside the detection range for the Laser Sync. Detector.
SOLUTION:
The detection width of the Laser Sync. Detector has been increased from 2.3 mm to 3.0 mm.
GENERAL:
The following part update is being issued for all A230/A231/A232 Parts Catalogs.
OLD PART NO. NEW PART NO.
A2325310
   
2000 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN TECHNICAL SERVICE BULLETIN TECHNICAL SERVICE BULLETIN TECHNICAL SERVICE BULLETIN
A230/A231/A232 – 060 A230/A231/A232 – 060 A230/A231/A232 – 060 A230/A231/A232 – 060
A2935310 Laser Sync. Detector
DESCRIPTION
09/13/2000 09/13/2000 09/13/2000 09/13/2000
REFERENCE
QTY INT PAGE ITEM
1 1 23 25
Continued...
CONTROL NO. 054ABW