Flash Memory Card Automatic Detection - Ricoh A230 Service Manual

SWAPBOX INSTALLATION

3.2.2 FLASH MEMORY CARD AUTOMATIC DETECTION

1. Insert the 4MB flash memory card supplied from Ricoh into a card slot.
2. Windows 95 automatically detects the card, if this is the first time a flash card
has been used, Windows 95 installs the necessary drivers, and the "Found new
hardware" dialog box should appear automatically.
3. Wait about 30 s, then choose "SwapFTL Binary Utility" from the
"SCMSwapFTL" program group.
4. After the utility software starts, choose [Image] – [Read].
If "Failed to open PCCard" appears, see Troubleshooting.
5. Click OK to read the card.
If this works successfully, a new file is created as a temporary file, and this can
be stored on the computer.
SM
18-6
A203/A231/A232