Tech Service Bulletin No. A230/A231/A232 – 032
Page 8 of 9
6. To prevent the Extended Harness from moving
freely inside the machine, clamp it to the Edge
Protector Saddle (protective wire clamp) located
above and to the left of the Toner Bottle insertion
area.
7. Since one Interlock Switch has been added to
the new Right Cover Switch Assembly, it is
necessary to replace the Step Screws with
longer ones. At this time, confirm that the
Interlock Switch Actuators are under the lever
and confirm that the switch functions normally.
Edge Protector Saddle
Interlock Switch
Extension Harness
Extension Harness
Lever Actuator
Stepped Screw
Continued...