Ricoh A230 Service Manual page 461

2.8.4 ORIGINAL EXIT MECHANISM (DOUBLE-SIDED ORIGINAL
MODE)
[B]
[A]
The exit gate solenoid [A] turns on and the inverter gate solenoid [B] remains off,
and the original is fed out to the upper tray. The transport belt motor turns off when
the trailing edge of the original passes through the exit sensor [C].
To stack the originals tidily on the upper tray, the feed-out motor speed is reduced
approximately 37 mm after the trailing edge of the original turns off the inverter
sensor [D].
SM
ORIGINAL INVERSION AND FEED-OUT MECHANISM
[C]
12-17
[D]
A680D514.WMF
A230/A231/A232