Ricoh A230 Service Manual page 1118

Tech Service Bulletin No. A230/A231/A232 – 062
Page 3 of 3
3. Attach the 2 Sponges (A) to the Mylar as shown in the illustration below.
(A)
(A)
1mm
1mm
4. Remove the Development Unit.
5. Cover the recycled toner inlet temporarily with Tape (B) as shown illustration below.
6. Affix the Mylar modified in step 3 to the Development Unit.
NOTE: First clean the attachment surface with alcohol or a damp cloth.
(B)