Ricoh A230 Service Manual page 674

AUTOMATIC SERVICE CALLS
Address (H)
480A4E 16th SC code - High byte (BCD)
480A4F 16th SC code - Low byte (BCD)
480A50 17th SC code - High byte (BCD)
480A51 17th SC code - Low byte (BCD)
480A52 18th SC code - High byte (BCD)
480A53 18th SC code - Low byte (BCD)
480A54 19th SC code - High byte (BCD)
480A55 19th SC code - Low byte (BCD)
480A56 20th SC code - High byte (BCD)
480A57 20th SC code - Low byte (BCD)
To add additional SC codes, program them in the blank addresses.
Wild Cards
This function allows 'A' or 'a', to be used as a wild card instead of numbers from 0
to 9. For example, '1AA' or '1aa' means all the SC codes from 100 to 199, and
'39A' or '39a' means all the SC codes from 390 to 399.
The fax unit cannot make an automatic service call when a Fax SC code condition
has occurred. Refer to Troubleshooting for Fax SC code details.
Manual Service Call
If the service station needs a report, the user can make a service call manually, by
changing bit 7 of User Parameter 14 (0E) to '1'.
A230/A231/A232
Definition
2-2
Default SC code
FF
Not programmed
FF
FF Not programmed
FF
FF Not programmed
FF
FF Not programmed
FF
FF Not programmed
FF
SM