Rev. 06/99
7.3
ROM HISTORY
A230/A231/A232 Firmware Modification History (Copier)
Description of Modification
Version A, B, & C were for pre-
production machines.
Corrects the following:
•
Machine may stall when making
a combined copy after printing
the archive file list.
•
The "Menu" key LED stays on
even if the copy job is finished.
•
When pressing the "+" after
400% when using the Zoom key,
"* maximum" is displayed. If this
condition continues until the
auto reset time, a SC990 may
occur.
•
When the copier HDD is
defective and the main power
switch is turned on, the machine
does not generate a SC
condition but may stall.
•
The description of SP 5803-6
has been corrected.
•
When an original is stored as an
archive file, two archive files will
be made.
•
Memory clear procedure
corrected. Enter SP5801. Hold
down the "1" for over 3 s.
•
SP2213 display corrected.
•
Change the determination of the
paper size when the machine
detects a non-standard original
size.
Specification change:
•
If TD Sensor Initialization is
preformed during warm-up – SC
542 will occur. Change – TD
Initialization can not be
performed until warm up is
complete.
SM
Firmware Level
Serial Number
A2325113 D
From initial
production.
A2325113 E
April 1998
production.
7-27
ROM HISTORY
Firmware
Version
13.1.7 na
13.1.8 na
A230/A231/A232