Ricoh A230 Service Manual page 1031

decreased turboelectric charge
of the Toner.
•
The initial machine warm-up
operations stop if one or more of
the doors to the option units are
open (e.g.1 bin tray, finisher).
The machine warm-up does not
restart after closing the doors.
•
When in user code mode, after
entering the power save mode
and then exiting, the counter
does not count the number of
copies the user makes.
•
Using the Norwegian Language,
when the machine should
display 'Copying will start after
warm up' in Norwegian, it is
displayed in French.
Conditions:
- switching on the machine in
cold condition,
- setting original and pressing
start key during machine warm-
up .
The French message then
appears in the display.
•
SP2207 displayed a spelling
error.
Modification:
Corrected spelling to "Forced".
⇒
Corrects the following
• When SC101 occurs during a Fax
transmission the machine prints
a blank page. The transmission
results are then reported as
normal. The first page is blank
and an SC101 message is
displayed.
Countermeasure:
No actual transmission will take
place during memory
transmission.
In the case of immediate
transmission, the transmission
will be interrupted and an error
will be reported.
•
The Scanner software was also
modified so that the driver in use
displays an error message.
•
When a fusing jam occurs, the
jammed paper may not be
visible to the operator and a
service call result.
Countermeasure:
The detection of fusing jams has
been modified so that the paper
will stop at a point where the
trailing edge is visible.
A230/A231/A232
ROM HISTORY
A2325113 T
7-33
Rev. 09/99
14.3
SM