Sram Data Backup And Restore - Ricoh A230 Service Manual

SRAM DATA BACKUP AND RESTORE

5.5 SRAM DATA BACKUP AND RESTORE
5.5.1 SRAM BACKUP TO A FLASH MEMORY CARD
This function makes a backup copy of all the fax SRAM data onto a flash memory
card. If a computer based PC card writer system is available, the backup can be
saved as a computer file from the flash memory card.
If the EXSAF board is not installed, this function makes a backup copy of the
standard SRAM on the FCU.
If the EXSAF board is installed, this function makes a backup copy of the standard
SRAM and the SRAM on the optional EXSAF board.
NOTE: This procedure erases the flash memory card completely before uploading
SRAM data.
1. Turn off the machine.
[A]
[B]
SW3
A693R507.WMF
2. Connect the flash memory card [B] to the card slot as shown.
NOTE: SW3 below the card slot must be OFF (lower position).
3. Turn on the machine and enter the fax service mode.
5-11
SM A230/A231/A232