Ricoh A230 Service Manual page 1039

Tech Service Bulletin No. A230/A231/A232 – 032
Page 6 of 9
Right Door Switch & Fuser Knob Spring Installation Procedure
1. Turn the main power switch off. Open the
Front Cover and remove both the Upper and
Left Inner Covers (2 screws each). The
harness of the Total Counter is attached to
the mainframe behind the Left Inner Cover.
NOTE: Remove the Total Counter
connector before completely
removing the Left Inner Cover to
prevent damage to the connector.
2. Remove the connector of the Interlock
Switch (inside the Upper Inner Cover) and
the 2 screws that fasten the bracket to the
mainframe. Notice the hook that engages to
the frame of the copier. This will need to be
re-engaged during reinstallation. Finally,
remove the Right Cover Switch Assembly.
3. Remove the connector from the Push Switch
that is attached to the Front Cover Switch
assembly (located behind the Left Inner
Cover). Remove the harness from the wire
clamp.
A230/A231/A232
Left Inner Cover
Upper Inner Cover
Right Cover Switch Assembly
Screws
Front Cover Switch
Assembly
Push Switch
Continued...