Ricoh A230 Service Manual page 460

ORIGINAL INVERSION AND FEED-OUT MECHANISM
2.8.3 ORIGINAL EXIT MECHANISM (SINGLE-SIDED ORIGINAL
MODE)
[A]
[B]
A680D513.WMF
The exit gate solenoid [A] remains off and the original is fed out to the right exit
tray. The transport belt motor turns off after the exit sensor [B] turns on.
To stack the originals tidily on the exit tray, the feed-out motor speed is reduced
approximately 15 mm before the trailing edge of the original turns off the exit
sensor.
12-16
A230/A231/A232 SM