Ricoh A230 Service Manual page 749

BIT SWITCHES
System Switch 0F
No FUNCTION
0 Country code for functional
to settings (Hex)
7
00: France
01: Germany
02: UK
03: Italy
04: Austria
05: Belgium
06: Denmark
07: Finland
08: Ireland
09: Norway
0A: Sweden
0B: Switz.
0C: Portugal
0D: Holland
0E: Spain
0F: Israel
System Switch 10
No FUNCTION
0 Threshold memory level for
to parallel memory transmission
7
System Switch 11
No FUNCTION
0 TTI printing position
0: Printed before the data
leading edge
1: Superimposed on the page
data
1 TSI (G3) or CIL (G4) printing
position
0: Printed before the data
leading edge
1: Superimposed on the page
data
2 Not used
to
6
7 Use of parallel memory
transmission with G4
transmission
0: Disabled 1: Enabled
A230/A231/A232
This country code determines the factory settings
of bit switches and RAM addresses. However, it
has no effect on the NCU parameter settings and
10: Canada communication parameter RAM addresses.
11: USA
12: Asia
Cross reference
13: Japan
NCU country code: Function 06, parameter C.C.
14: Hong Kong
15: South Africa
16: Australia
17: New Zealand
18: Singapore
19: Malaysia
1A: China
1B: Taiwan
20: Turkey
21: Greece
Threshold = N x 64 kbytes + 256 kbytes
N can be between 00 - FF(H)
Default setting: 04(H) = 512 kbytes
Change this bit to 1 if the TTI overprints
information that the customer considers to be
important (G3 transmissions).
Change this bit to 1 if the TSI (G3) or CIL (G4)
overprints information that the customer considers
to be important.
Do not change the factory settings.
This determines whether parallel transmission
can be used with a G4 transmission or not.
Note that this bit is only effective if Parallel
Memory transmission is enabled (User Parameter
07 - bit 2).
COMMENTS
COMMENTS
COMMENTS
4-24
SM